Mixture | Type | Colour | Hardness ShoA |
Density g/cm3 |
Tensile srength (N/mm Mpa) |
Elongation at rupture % |
Operating temperature (C) |
|
General determination | SBR | 7993 | black | 65 +/- 5 | 1,47 | 4,0 | 250 | -25 – + 80 |
General determination | SBR | 9035 | white | 60 +/- 5 | 1,50 | 5,0 | 300 | -25 – + 80 |
Oil resistant | NBR / SBR | 7645 | black | 65 +/- 5 | 1,65 | 3,0 | 200 | -25 – + 80 |
gasoline- and oil-resistant | NBR / SBR | 7672 | black | 70 +/- 5 | 1,30 | 8,0 | 250 | -25 – + 80 |
heat-resistant, weather-resistant, acid and alkali resistant | EPDM | 7815 | black | 60 +/- 5 | 1,22 | 10,0 | 400 | -40 – +125 |
Para | NR | 7689 | grey | 40 +/- 5 | 1,00 | 12,0 | 600 | -25 – + 80 |
Wear-resistant | NR / SBR | 7750 | black | 60 +/- 5 | 1,15 | 17,0 | 400 | -25 – + 80 |
We basically have mats available without inlay, other than the type 7993, from which also models with 1 or 2 inlays can be obtained.
All types are also produced with insert, but in this case there is a minimum order requirement.
Typical thickness: 1; 2; 3; 4; 5; 6; 8 and 10mm (with a tolerance acc. to DIN 7715 P2), thinner / thicker plates can be produced.
Normal roll length: 10m +/- 2%, and roles in customized lengths can be produced
Roll width: 1,200mm und1.400mm +/- 1%, when required, smaller plates can be made for an additional charge, if the minimum order quantity is reached.
From the roll length can be cut (minimum 0.5m.), from the roll width – except Type 7750 – will not be cut!
The plate divorce can be solved (strips, rectangles), in this case, the total width of the plates must be considered in the calculation.
For individual needs not listed here, we can provide a production deal.